eSUN eClean Natural 3D Print filament 0.1Kg Bag
eSUN eClean Natural 3D Print filament 0.1Kg Bag
Condition: New
5 in stock
| ELBER Part Number | |
| Manufacturer | |
| Descriptions | Used to clean the nozzles of the printers, After printing, use Clean filament to clean the nozzles, and then print other colors or types of materials. Especially when you plan to print low-temperature materials such as PLA and high-temperature materials such as carbon fiber reinforced nylon filament, Clean will greatly reduce the possibility of nozzle clogging;Transparent color and wide use temperature make Clean suitable for cleaning different colors, types and printing temperatures filaments. |
Notes
For 160-300℃ range Printing Filaments
Highlights
Cleaning nozzles
Great compatibility
Used to clean the nozzles of the printers, After printing, use Clean filament to clean the nozzles, and then print other colors or types of materials.
Especially when you plan to print low-temperature materials such as PLA and high-temperature materials such as carbon fiber reinforced nylon filament, Clean will greatly reduce the possibility of nozzle clogging;
Transparent color and wide use temperature make Clean suitable for cleaning different colors, types and printing temperatures filaments.
Weight
100g
Package Weight
100g
Package Length
200mm
Package Width
200mm
Package Height
120mm
Fillament Material
PVA
Filament Colour
Natural
Information on technical characteristics, the delivery set, the country of manufacture, and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | eClean |
| Density(g/cm3) | 0.95 |
| Heat Distortion Temp(℃,0.45MPa) | 45 |
| Melt Flow Index(g/10min) | / |
| Tensile Strength(MPa) | 23 |
| Elongation at Break(%) | 580 |
| Flexural Strength(MPa) | / |
| Flexural Modulus(MPa) | / |
| IZOD Impact Strength(kJ/㎡) | 29 |
| Durability | / |
| Printability | / |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 160 – 300℃ |
| Bed temperature(℃) | —— |
| Fan Speed | —— |
| Printing Speed | —— |
| Heated Bed | —— |
| Recommended Build Surfaces | —— |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | √ |
| Print recommend | —— |